Skip to content

Offline Upgrade

The Workbench supports offline upgrades. You need to first load the image from the installation package and then run the corresponding command to upgrade.

tar -vxf amamba_x.y.z_amd64.tar

After unpacking, you will get a compressed bundle: amamba_x.y.z.bundle.tar

Load Image from Installation Package

Support loading images in two ways.

Sync Images via charts-syncer

If there is an image repository in the environment, it is recommended to synchronize the images to the image repository through charts-syncer for more efficient and convenient operation.

  1. Create load-image.yaml with the following content as the configuration file for charts-syncer.

    All parameters in the load-image.yaml file are required. You need a private image repository and refer to the following instructions to modify each configuration. For detailed explanation of the charts-syncer configuration file, refer to its official documentation.

    If the HARBOR chart repo is already installed in the environment, charts-syncer also supports exporting the chart as a tgz file.

    load-image.yaml
    source:
      intermediateBundlesPath: amamba-offline # (1)!
    target:
      containerPrefixRegistry: 10.16.10.111 # (2)!
      repo:
        kind: HARBOR # (3)!
        url: http://10.16.10.111/chartrepo/release.daocloud.io # (4)!
        auth:
          username: "admin" # (5)!
          password: "Harbor12345" # (6)!
      containers:
        auth:
          username: "admin" # (7)!
          password: "Harbor12345" # (8)!
    
    1. Relative path to run the charts-syncer command, not the relative path between this YAML file and the offline package
    2. Change to your image repository url
    3. Can also be any other supported Helm Chart repository category
    4. Change to the chart repo project url
    5. Your image repository username
    6. Your image repository password
    7. Your image repository username
    8. Your image repository password

    If the CHARTMUSEUM chart repo is already installed in the environment, charts-syncer also supports exporting the chart as a tgz file.

    load-image.yaml
    source:
      intermediateBundlesPath: amamba-offline # (1)!
    target:
      containerPrefixRegistry: 10.16.10.111 # (2)!
      repo:
        kind: CHARTMUSEUM # (3)!
        url: http://10.16.10.111 # (4)!
        auth:
          username: "rootuser" # (5)!
          password: "rootpass123" # (6)!
      containers:
        auth:
          username: "rootuser" # (7)!
          password: "rootpass123" # (8)!
    
    1. Relative path to run the charts-syncer command, not the relative path between this YAML file and the offline package
    2. Change to your image repository url
    3. Can also be any other supported Helm Chart repository category
    4. Change to chart repo url
    5. Your image repository username, if chartmuseum does not have login authentication enabled, you do not need to fill in auth
    6. Your image repository password
    7. Your image repository username
    8. Your image repository password

    If the chart repo is not installed in the current environment, charts-syncer also supports exporting the chart as a tgz file and storing it in a specified path.

    source:
      intermediateBundlesPath: amamba-offline # (1)!
    target:
      containerRegistry: 10.16.23.145 # (2)!
      containerRepository: release.daocloud.io/amamba # (3)!
      repo:
        kind: LOCAL
        path: ./local-repo # (4)!
      containers:
        auth:
          username: "admin" # (5)!
          password: "Harbor12345" # (6)!
    
    1. Relative path to run the charts-syncer command, not the relative path between this YAML file and the offline package
    2. Change to your image repository url
    3. Change to your image repository
    4. Local path of the chart
    5. Your image repository username
    6. Your image repository password
  2. Place amamba_x.y.z.bundle.tar in the amamba-offline folder.

  3. Run the command to sync images.

    charts-syncer sync --config load-image.yaml
    

Load Images Directly via Docker or containerd

  1. Unpack the tar compressed bundle.

    tar -vxf amamba_x.y.z.bundle.tar
    

    After successful unpacking, you will get 3 files:

    • hints.yaml
    • images.tar
    • original-chart
  2. Run the following command to load the images from the local to Docker or containerd.

    docker load -i images.tar
    
    ctr -n k8s.io image import images.tar
    

Note

  • Images need to be loaded via Docker or containerd on each node.
  • After loading, the images need to be tagged to match the Registry, Repository, and installation consistency.

Upgrade

  1. Check if the Workbench helm repository exists.

    helm repo list | grep amamba
    

    If the result is empty or shows the following message, proceed to the next step; otherwise, skip the next step.

    Error: no repositories to show
    
  2. Add the helm repository for Workbench.

    helm repo add amamba-release http://{harbor url}/chartrepo/{project}
    
  3. Update the helm repository for Workbench.

    helm repo update amamba-release # (1)!
    
    1. If the Helm version is too low and the update fails, try executing helm update repo
  4. Choose the version of the Workbench you want to install (recommended to install the latest version).

    helm search repo amamba-release/amamba --versions
    
    NAME                    CHART VERSION  APP VERSION  DESCRIPTION
    amamba-release/amamba    0.24.0         0.24.0       Amamba is the entrypoint to DCE5.0, provides de...
    amamba-release/amamba    0.23.0         0.23.0       Amamba is the entrypoint to DCE5.0, provides de...
    amamba-release/amamba    0.22.1         0.22.1       Amamba is the entrypoint to DCE5.0, provides de...
    amamba-release/amamba    0.22.0         0.22.0       Amamba is the entrypoint to DCE5.0, provides de...
    amamba-release/amamba    0.21.2         0.21.2       Amamba is the entrypoint to DCE5.0, provides de...
    amamba-release/amamba    0.21.1         0.21.1       Amamba is the entrypoint to DCE5.0, provides de...
    amamba-release/amamba    0.21.0         0.21.0       Amamba is the entrypoint to DCE5.0, provides de...
    ...
    
  5. Back up the --set parameters.

    Before upgrading the Workbench version, it is recommended to run the following command to back up the --set parameters of the old version.

    helm get values amamba -n amamba-system -o yaml > bak.yaml
    
  6. Run helm upgrade.

    Before upgrading, it is recommended to overwrite the global.imageRegistry field in bak.yaml with the current image repository address.

    export imageRegistry={your image repository}
    
    helm upgrade amamba amamba-release/amamba \
      -n amamba-system \
      -f ./bak.yaml \
      --set global.imageRegistry=$imageRegistry \
      --version 0.24.0
    
  1. Prepare the original-chart (obtained by unpacking amamba_x.y.z.bundle.tar).

  2. Back up the --set parameters.

    Before upgrading the Workbench version, it is recommended to run the following command to back up the --set parameters of the old version.

    helm get values amamba -n amamba-system -o yaml > bak.yaml
    
  3. Run helm upgrade.

    Before upgrading, it is recommended to overwrite the global.imageRegistry field in bak.yaml with the current image repository address.

    export imageRegistry={your image repository}
    
    helm upgrade amamba original-chart \
      -n amamba-system \
      -f ./bak.yaml \
      --set global.imageRegistry=$imageRegistry
    

Comments